Stirrer Accessories
Chemglass Life Sciences Stirring Shaft, 19mm, Polished, Chem-Stir, 1 to 2L Flasks, 555mm OAL, Complete with PTFE Nut and Bolt
Stirring Shaft, 19mm, Polished, Chem-Stir, 1000mL-2L Flasks, 555mm OAL, Complete with PTFE Nut and Bolt. A 19mm OD precision ground and polished stirrer shaft with our patented Chem-Stir blade attachment system. Shaft (C) has been manufactured with a ring at the lower end to permit attachment of the blade (B) with a PTFE nut (D) and bolt (A). Shaft is supplied complete with PTFE nut and bolt set. For use with PTFE bearings such as the CG-2086. Polished shaft will not cause abrasion to the sealing surfaces of the PTFE bearing, thereby allowing a vacuum tight seal. Uses the same PTFE nut and bolt blade attachment method as the CG-2084 ground shaft.PLEASE NOTE: STIRRER BLADES MUST BE PURCHASED SEPARATELY.THESE SHAFTS ARE NOT TO BE USED WITH ANY TYPE OF GLASS BEARING. FOR GROUND SHAFTS USED WITH GLASS BEARINGS SEE CG-2084.ALSO NOTE: 19MM SHAFTS HAVE A REDUCED DIAMETER TOP SECTION THAT IS 1/2"OD, PLEASE KEEP THIS IN MIND WHEN SELECTING THE PROPER SIZE COUPLING.
Chemglass Life Sciences Replacement 25.4mm Stirrer Shaft, Reactor Size: 30L, Fits Support Frame: CG-1968-X-12, Overall Length: 41.9"
Replacement 25.4mm Stirrer Shaft, Reactor Size: 30L, Fits Support Frame: CG-1968-X-12, Overall Length: 41.9". Precision ground and polished stirrer shaft for use with Chemglass process reactors. Designed to utilize CG-2095 and CG-2096 PTFE agitators. Lower portion of stirrer shaft is sandblasted and has a 3/8¿ wide flat. REPLACEMENT STIRRER SHAFTS ARE FOR USE WITH MECHANICAL SEAL STIR BEARING ON LISTED SUPPORT FRAME.
Chemglass Life Sciences Replacement 25.4mm Stirrer Shaft, Reactor Size: 50L (Tall), Fits Support Frame: CG-1968-X-14, Overall Length: 51.7"
Replacement 25.4mm Stirrer Shaft, Reactor Size: 50L (Tall), Fits Support Frame: CG-1968-X-14, Overall Length: 51.7". Precision ground and polished stirrer shaft for use with Chemglass process reactors. Designed to utilize CG-2095 and CG-2096 PTFE agitators. Lower portion of stirrer shaft is sandblasted and has a 3/8¿ wide flat.REPLACEMENT STIRRER SHAFTS ARE FOR USE WITH MECHANICAL SEAL STIR BEARING ON LISTED SUPPORT FRAME.
Chemglass Life Sciences Optional 25.4mm Stirrer Shaft, Reactor Size: 50L (Short), Fits Support Frame: CG-1968-F-10 & CG-1968-F-12, Overall Length: 39.6"
25.4mm Stirrer Shaft, Reactor Size: 50L (Short), Fits Support Frame: CG-1968-F-10 & CG-1968-F-12, Overall Length: 39.6". Precision ground and polished stirrer shaft for use with Chemglass process reactors. Designed to utilize CG-2095 and CG-2096 PTFE agitators. Lower portion of stirrer shaft is sandblasted and has a 3/8¿ wide flat. REPLACEMENT STIRRER SHAFTS ARE FOR USE WITH MECHANICAL SEAL STIR BEARING ON LISTED SUPPORT FRAME.
Accuflow Systems Saint-Gobain Chemware Griffin Beaker, PTFE, 50 mL, Inert
Saint-Gobain Chemware PTFE Griffin beaker, 50 mL, provides chemically inert, reusable labware for handling aggressive reagents and ultra-pure processes. The fluoropolymer construction minimizes contamination risk and is suitable for applications where glass or other plastics are incompatible.
- PTFE construction provides broad chemical resistance.
- 50 mL capacity.
- Griffin beaker shape for easy pouring and mixing.
- Non-wetting surface reduces carryover and contamination.
- Reusable, unbreakable, and heat resistant for routine lab use.
- Suitable for aggressive reagent handling and ultra-pure processing.
Chemglass Life Sciences Stirring Shaft, PTFE Covered SS, 510mm OAL, 81mm OD Anchor Style Blade, Fits 1000mL Reactors
Stirring Shaft, PTFE Covered SS, 510mm OAL, 81mm OD Anchor Style Blade, Fits 1000mL Reactors
Ace Glass, Inc. 10mm 69cm solid glass stir shaft, polished, button type
10mm O.D. polished glass stirring shaft; button type. Length: 69cm. Use with only ACE PTFE stirrer bearings. Shafts accept 316 SS multi-paddle or turbine agitators secured with set-screw on ground flat section.
Chemglass Life Sciences Stirring Shaft, 10mm, Button Style, for 5000mL to 20000mL Flasks, 600mm OAL
Stirring Shaft, 10mm, Button Style, for 5000mL to 22000mL Flasks, 600mm OAL. A 10mm precision ground stirrer shaft to fit CG-2070 through CG-2072 10mm bearings. Side button for attachment of CG-2080 or CG-2081 PTFE stirrer blades.PLEASE NOTE: THESE SHAFTS ARE NOT TO BE USED WITH ANY TYPE OF PTFE BEARING. FOR POLISHED SHAFTS USED WITH PTFE BEARINGS SEE CG-2079.
Chemglass Life Sciences Optional 25.4mm Stirrer Shaft, Reactor Size: 50L (Tall), Fits Support Frame: CG-1968-F-14, Overall Length: 48.2"
25.4mm Stirrer Shaft, Reactor Size: 50L (Tall), Fits Support Frame: CG-1968-F-14, Overall Length: 48.2". Precision ground and polished stirrer shaft for use with Chemglass process reactors. Designed to utilize CG-2095 and CG-2096 PTFE agitators. Lower portion of stirrer shaft is sandblasted and has a 3/8¿ wide flat. REPLACEMENT STIRRER SHAFTS ARE FOR USE WITH MECHANICAL SEAL STIR BEARING ON LISTED SUPPORT FRAME.
Bellco Glass, Inc. Over Head Drive PTFE Impeller Assembly , 8L
Ideal use for over head drive vessels. Description: 8L OHD Impeller Assembly Consists of Paddle, Plug, Paddle Holder, andDrive Shaft. MADE IN THE USAPaddle [A523-214]: PTFE material, 171.5mm wide x 76.2mm tall x 1.6mm thickPlug [A542-49]: PTFE, 9.5mm OD x 19.1mm long (approx.)Paddle Holder [A542-50]: White PTFE, 279.4mm long x 19.1mm ODDrive Shaft [A542-46]: 316L SST, 190.5mm long x 6.4mm OD (approx.)
Grainger Shaft Grounding Ring For 1 7/8 in Shaft
The AEGIS Shaft Grounding Ring is a one-piece stainless steel ring that provides a path to ground for induced shaft voltages. It has a split-ring design that allows easy installation without shaft removal. This grounding ring fits shafts from 1-3/4" to 3-15/16" diameter and has a durable construction that provides long service life. It comes with oxide-piercing stainless steel mounting screws for solid electrical contact. The one-piece design eliminates the need for hinges or springs. This is an effective and convenient option for shaft grounding in electric motors, generators, turbines, and other rotating equipment.